A parameter for quantitative analysis of plasticity induced crack closure

article

Antunes, F.V.
Correia, L.
Ramalho, A.L.

Elsevier

ANTUNES, F. V.; CORREIA, L.; RAMALHO, A. L. (2015) - A parameter for quantitative analysis of plasticity induced crack closure. International Journal of Fatigue. ISSN 0142-1123. Vol. 71, p. 87-97

0142-1123

A parameter for quantitative analysis of plasticity induced crack closure

Plasticity induced crack closure (PICC)
Finite element method
Plastic wedges
Residual plastic field

info:eu-repo/grantAgreement/FCT/5876-PPCDTI/PTDC%2FEME-PME%2F114892%2F2009/PT
info:eu-repo/grantAgreement/FCT/COMPETE/PEst-C%2FEME%2FUI0285%2F2013/PT

2017-04-11T15:04:11Z
2017-04-11T15:04:11Z
2015-02

Numerical models have been successfully developed to predict plasticity induced crack closure (PICC). However, despite the large research effort a full understanding of the links between physical parameters, residual plastic wake and PICC has not been achieved yet. The plastic extension of material behind crack tip, Dyp, obtained by the integration of vertical plastic deformation perpendicularly to crack flank, is proposed here to quantify the residual plastic field. The values of Dyp and PICC were obtained numerically in a M(T) specimen using the finite element method. An excellent correlation was found between PICC and Dyp which indicates that this parameter controls the phenomenon, and can be used to quantify the effect of physical parameters. An empirical model was developed to predict PICC assuming that the residual plastic field is a set of vertical plastic wedges, that the linear superposition principle applies and that the influence of a particular wedge exponentially decreases with distance to crack tip. The model was applied successfully to predict PICC for different residual plastic fields which provided an additional validation of Dyp as the parameter controlling PICC.
info:eu-repo/semantics/publishedVersion

openAccess
http://creativecommons.org/licenses/by/4.0/

eng