Bin-picking solution for randomly placed automotive connectors based on machine learning techniques

article

Torres, Pedro
Arents, Janis
Marques, Hugo
Marques, Paulo

Gemma Piella

TORRES, P. [et al.] (2022) - Bin-picking solution for randomly placed automotive connectors based on machine learning techniques. Electronics DOI https://doi.org/10.3390/electronics11030476

2079-9292

Bin-picking solution for randomly placed automotive connectors based on machine learning techniques

bin-picking
machine learning
robotics
YOLOv5
Industry 4.0

Electronics;

2022-03-22T14:07:38Z
2022-03-22T14:07:38Z
2022

This paper presents the development of a bin-picking solution based on low-cost vision systems for the manipulation of automotive electrical connectors using machine learning techniques. The automotive sector has always been in a state of constant growth and change, which also implies constant challenges in the wire harnesses sector, and the emerging growth of electric cars is proof of this and represents a challenge for the industry. Traditionally, this sector is based on strong human work manufacturing and the need arises to make the digital transition, supported in the context of Industry 4.0, allowing the automation of processes and freeing operators for other activities with more added value. Depending on the car model and its feature packs, a connector can interface with a different number of wires, but the connector holes are the same. Holes not connected with wires need to be sealed, mainly to guarantee the tightness of the cable. Seals are inserted manually or, more recently, through robotic stations. Due to the huge variety of references and connector configurations, layout errors sometimes occur during seal insertion due to changed references or problems with the seal insertion machine. Consequently, faulty connectors are dumped into boxes, piling up different types of references. These connectors are not trash and need to be reused. This article proposes a bin-picking solution for classification, selection and separation, using a two-finger gripper, of these connectors for reuse in a new operation of removal and insertion of seals. Connectors are identified through a 3D vision system, consisting of an Intel RealSense camera for object depth information and the YOLOv5 algorithm for object classification. The advantage of this approach over other solutions is the ability to accurately detect and grasp small objects through a low-cost 3D camera even when the image resolution is low, benefiting from the power of machine learning algorithms.
info:eu-repo/semantics/publishedVersion

openAccess

eng